Blog Archives

s

With the latest release of CentOS-7, we have added several new Alternative Architecture (AltArch) releases in addition to our standard x86_64 (x86 {Intel/AMD} 64-bit) architecture. Architectures (aka arches) in Linux distributions refer to the type of CPU on which the distribution runs.  In the case of our standard release, it runs on x86 64-bit CPUs […]

Johnny Hughes has already posted images for Cubietruck and Raspberry Pi 2 and told you how to use them with your boards. In this post, I would like to tell you all the what has gone into development of RootFS Build Factory so far which includes a bit about the CentOS ARMv7 effort. When I […]

Ten days ago I wrote an article here about an armv7hl test image for the Cubietruck 32-bit ARM board.  I have just uploaded a similar armv7hl image for the Raspberry Pi2. Both of these images are created with the RootFS Build Factory (a 2015 CentOS GSoC Project from Mandar Joshi sponsored by the CentOS Project). […]

About a week after announcing the CentOS 7 alpha build for AArch64 hardware, I got an email from the fine folks at AMD asking for my address. Three days later, a pair of AMD’s Seattle AArch64 development boards showed up at my front door.  Hardware really is the best sort of gift, especially when you’re […]

As Jim Perrin pointed out in an earlier post here on seven.centos.org, we have commenced an armv7 (actually, armv7hl) open build to try and produce CentOS-7 for arm32 boards like the Cubietruck, Raspberry Pi2, and ODROID-C1 (among others). We now have a minimal sdcard only image for the Cubietruck from our unsigned (and as yet […]

Initially I meant for this to be a much more in-depth blog post about running GlusterFS on AArch64 hardware, but honestly it’s been ridiculously easyto get running. There isn’t much to say about running it that isn’t already covered in the GlusterFS quickstart guide. Even building GlusterFS on AArch64 was a snap; I simply pulled […]

The journey for rebuilding the latest release of CentOS Linux 7 on AArch64 hardware has certainly been an interesting one. After a few bug reports, a couple minor patches, and several iterations through the build system, we finally have a release for community testing and consumption, which we’ll have available for install early next week. There […]

As I’d mentioned previously, the fine folks of Applied Micro were kind enough to give us an X-C1 development box to see if it was feasible to build and run CentOS Linux 7. My first attempt through, I realized I hadn’t been taking decent notes, so I scrapped most of the package work and started […]

ARMv7 With the growing list of easily accessible ARM hardware like the RaspBerry Pi 2 and the ODROID-C1, several community efforts have sprouted, working out the details for getting CentOS-7 built and available for the new boards. One of our UK based community members has made the most progress so far, posting his build process […]

No newer/older posts